Are you looking for the best MCX5 milling unit factories in China? If so, you’re in the right place. In this article, we’ll compare the top manufacturers, highlighting their unique features, product quality, and what sets them apart in the dental milling industry. Let’s dive in and find the perfect fit for your needs.

inLab MC X5: Dental Milling Machine

Milling burs——Sirona（MCX5）

Product Details: The Sirona inLab MC X5 milling burs available on Ceradirect are made of ultra-fine grain hard alloy material, which enhances the service life of the burs. These burs offer high precision, stable quality, and sharp cutting edges. They are designed for efficient chip removal and wear resistance, ensuring high processing efficiency. The burs are available for various materials including zirconia, lithium disilicate, and composites. Specific sizes include 0.5mm, 1.0mm, and 2.5mm diameters for zirconia and lithium disilicate, among others.

Pros:
– Made of ultra-fine grain hard alloy material for extended service life
– High precision and stable quality
– Sharp cutting edges for efficient chip removal
– Wear-resistant for high processing efficiency
– Available for a variety of materials such as zirconia, lithium disilicate, and c…

Cons:
– No specific cons mentioned in the product description
– Shipping times can vary, with items not in stock taking up to 4 weeks

Dental lab SIRONA MCX5 Lithium Disilicate milling machine …

Product Details: The Sirona MCX5 milling burs are designed for use with the inLab MCX5 milling machine. These burs are available in various materials such as zirconia, lithium disilicate, PMMA, wax, PEEK, titanium, and composites. The zirconia burs come in sizes of 0.5mm, 1.0mm, and 2.5mm cutting diameters with a 3.0mm shank diameter and 52mm length. Lithium disilicate burs are available in sizes of 1.2mm, 1.4mm, and 2.2mm cutting diameters. The burs are made from ultra-fine grain hard alloy material, ensuring high precision, stable quality, and sharp cutting edges[2][4][5].

Pros:
– High-quality results with minimal manufacturing times and long tool lives
– Optimized for specific material properties, such as zirconium oxide and lithium…
– Diamond-coated burs provide considerably longer service life and finer surfaces
– Good chip removal, wear resistance, and high processing efficiency
– Compatible with various CAD/CAM systems and materials

Cons:
– No specific cons mentioned in the sources, but general considerations might incl…
– Potential for higher cost compared to non-diamond-coated or lower-quality altern…

Sirona MC X5 Bur 0.5mm Zirconia Dental Milling Bur MCX5

Product Details: The AmannGirrbach Ceramill Roto Motion Bur 0.6mm is compatible with Amann Girrbach Ceramill Motion 2 (4X & 5X), Ceramill Mikro, and the new Matik CAD CAM Dental Milling machines. This bur features a special coating developed for enhanced performance and durability.

Pros:
– Compatible with multiple CAD CAM dental milling machines
– Special coating for improved performance and durability
– Available in various sizes to suit different needs

Cons:
– May require specific machine compatibility checks
– Higher cost compared to some other dental milling burs

Milling Burs——Sirona InLab MCX5

Product Details: The Dentsply Sirona inLab MC X5 is a 5-axis dental milling and grinding machine designed for cost-efficient production in dental laboratories. It processes standard discs (Ø 98.5 mm, up to 30-35 mm thick) and blocks of various materials, including zirconia, polymers, composites, wax, metals, glass, and hybrid ceramics. The machine features a multi-block holder that can accommodate up to six blocks, allowing for high productivity. It supports both wet and dry production, with quick switching between these modes. The inLab MC X5 has a fully automated tool changer, Spindle Touch Technology for precise material use, and an intelligent suction concept

for easy cleaning.

Pros:
– Universal production unit for a wide range of materials
– Fast and easy switching between wet and dry production
– Fully automated tool changer with up to six tools per process
– High precision with Spindle Touch Technology
– Efficient material use and optimal processing of mesostructure blocks
– Easy cleaning with smooth surfaces, rounded contours, and software-supported cle…
– Compatibility with various CAD systems and external STL restoration data
– User-friendly interface and remote control via tablet PC

Cons:
– Requires specific inLab CAM software (version 16.1 service pack or higher)
– Dependent on compressed air pressure (min. 7 bar) and volume
– May require additional investment in specific tools and materials optimized for…

inLab MC X5 – Efficient and flexible

Product Details: The Dentsply Sirona inLab MC X5 is a universal 5-axis production unit designed for dental labs, focusing on economic and effective production. It processes standard discs (Ø 98.5 mm, up to 35 mm thick) and blocks, with a multi-block holder that can accommodate up to eight blocks of different materials and sizes. The machine supports both wet and dry production, depending on the material and indication, and is particularly proficient in the wet processing of glass ceramics. It features a fully automated tool changer with up to six tools per process, managed via the inLab CAM software. The Spindle Touch

Technology ensures precise workpiece positioning, and the machine is compatible with a wide range of materials including zirconia, polymers, composites, wax, and metals. Technical specifications include dimensions of 590 x 810 x 580 mm, a weight of 87 kg, and a required compressed air pressure of at least 7 bar.

Pros:
– Versatile production capabilities for both wet and dry processing
– High precision with Spindle Touch Technology for efficient material use
– Compatibility with a wide range of materials including zirconia, polymers, compo…
– Fully automated tool changer with up to six tools per process
– Easy switching between discs and blocks, taking just a few seconds
– User-friendly inLab CAM software for managing work steps, system configurations,…
– High-quality interior design with smooth surfaces and rounded contours for easy…
– Intelligent suction concept and software-supported cleaning system

Cons:
– Requires specific compressed air pressure (min. 7 bar) and power setup
– May require additional setup and maintenance for optimal performance
– Dependent on the inLab CAM software for full functionality

Sirona InLab MC X5

Dentsply Sirona inLab MC X5 | Dental Milling System

Dentsply Sirona inLab MC X5

Product Details: The Dentsply Sirona inLab MC X5 is a 5-axis milling and grinding machine designed for dental laboratories. It processes standard discs (ø 98.5 mm, up to 30 mm thick) and blocks in a single machine, with a multi-block holder that can accommodate up to six blocks of different materials. The machine supports both wet and dry production, depending on the material and indication, and allows quick switching between these modes. It is capable of processing a wide range of materials including zirconium oxide, polymers, composites, wax, metals, glass, and hybrid ceramics. The inLab MC X5 features a fully automated tool

changer with up to six tools per process, managed via the inLab CAM software. The machine’s design includes smooth surfaces and rounded contours for easy cleaning, an intelligent suction concept, and a software-supported cleaning system.

Pros:
– Universal production unit for various materials and indications
– Quick and easy switching between wet and dry production
– High productivity with the ability to process multiple blocks and discs
– Fully automated tool changer with intelligent tool management
– Easy cleaning due to smooth surfaces and rounded contours
– Compatibility with a wide range of materials from Dentsply Sirona and its partne…
– User-friendly inLab CAM software for machine operation and tool management
– Efficient material use and optimal processing of mesostructure blocks and titani…

Cons:
– No specific cons mentioned in the source
– Requires specific software version (inLab CAM SW 16.1 service pack or higher) fo…

Milling Burs—Sirona（MCX5）Milling Machine

Product Details: The Dentsply Sirona inLab MC X5 is a 5-axis milling and grinding unit designed for dental laboratories. It processes standard discs (Ø 98.5 mm, up to 30-35 mm thick) and blocks, with a multi-block holder that can accommodate up to six or eight blocks of different materials. The machine supports both wet and dry production, depending on the material and indication, and can switch between these modes quickly. It is compatible with a wide range of materials including zirconium oxide, polymers, composites, wax, metals, glass, and hybrid ceramics. The inLab MC X5 features a fully automated tool changer, Spindle Touch

Technology for precise material use, and an intelligent suction concept for easy cleaning. It is controlled by the inLab CAM software, which allows for tool management, machine configuration, and process initiation.

Pros:
– Universal production unit for various materials and indications
– Quick switching between wet and dry production
– High precision with Spindle Touch Technology
– Fully automated tool changer with intelligent tool management
– Easy cleaning with intelligent suction concept and software-supported cleaning s…
– Compatible with external CAD data and multiple CAD systems
– Efficient material use and optimal processing of mesostructure blocks and titani…

Cons:
– Requires specific compressed air pressure and volume
– Noise level of <63dba, which may be a consideration in some environments
– Dependent on inLab CAM software for full functionality

Comparison Table

Frequently Asked Questions (FAQs)

Frequently Asked Questions About MCX5 Milling Unit Factories in China

What types of materials can MCX5 milling burs process?

MCX5 milling burs are versatile and can process a variety of materials, including Zirconia, Porcelain/Ceramics, Titanium, Cobalt-Chromium Alloy, and even resin and metal. These burs are designed to work efficiently with different dental CAD/CAM systems, making them a reliable choice for various dental applications.

What are the common coatings available for MCX5 milling burs?

The MCX5 milling burs often come with different coatings to enhance their performance. You can find Diamond Coated (DC) burs, which offer a longer lifetime and can mill up to 350-500 units. There are also Diamond Like Carbon (DLC) coatings, which are more budget-friendly and can mill around 120-150 units. Additionally, some burs may have a Rainbow Coated (RC) option for better milling performance.

Which companies in China manufacture MCX5 milling burs?

Several reputable companies in China manufacture MCX5 milling burs. Companies like Jiangsu Weixiang Tools Manufacturing Co., Ltd, and Chirimen are well-known for producing high-quality dental milling burs compatible with the Sirona MCX5 system. These companies have extensive experience in the industry and offer a range of products to meet different needs.

What is the typical production capacity and delivery time for MCX5 milling burs from Chinese factories?

Chinese factories producing MCX5 milling burs often have a significant production capacity, with some manufacturers producing up to 50,000 pieces per year. This ensures that orders are fulfilled quickly. The delivery time is generally short, with many companies guaranteeing the shortest delivery time possible while maintaining high product quality.

What payment options are available when purchasing MCX5 milling burs from Chinese factories?

When purchasing MCX5 milling burs from Chinese factories, you have several payment options. These include Letter of Credit (L/C), Telegraphic Transfer (T/T), Documentary Payment (D/P), Western Union, PayPal, Money Gram, and TransferWise. This variety of payment methods makes it convenient for international customers to complete their transactions.