Are you looking to upgrade your dental lab with the best Cerec milling units from China? With several top-notch manufacturers in the market, choosing the right one can be overwhelming. Let’s dive into a comparison of the leading Cerec milling unit factories in China, including Yourcera, Zotion, and BAOT, to help you make an informed decision for your dental practice.

CEREC Dental Milling Machines

Product Details: The CEREC grinding and milling machines are designed for both wet and dry processing, allowing for the fabrication of various dental restorations including crowns, veneers, inlays, onlays, bridges, abutment crowns, and surgical guides. These machines are equipped with a device to vacuum up mill shavings and can handle multiple indications with outstanding results. They integrate seamlessly with Dentsply Sirona furnaces, intraoral and extraoral scanners, and multiple software solutions to ensure a seamless workflow. The machines are compatible with around 50 different materials from validated partners, and different tools are used depending on the type of material and processing method.

Pros:
– Handles multiple indications including crowns, veneers, inlays, onlays, bridges,…
– Can be used for both wet and dry processing, saving time by eliminating the need…
– Integrates with a range of intraoral and extraoral scanners, software solutions,…
– Compatible with around 50 different materials from validated partners.
– Increases speed and efficiency, allowing for higher productivity and expanded tr…

Cons:
– No specific cons mentioned in the provided source, but high initial investment c…
– Requires training and integration into existing practice workflows.

CEREC MC X: Dental Milling Machine

Product Details: The Dentsply Sirona CEREC MC X is a dental milling machine designed for precise and efficient production of various dental restorations. It integrates seamlessly with CEREC software to produce highly accurate surfaces, edges, and fissures. The machine can mill and grind inlays, onlays, crowns, veneers, bridges, abutments, and surgical guides from a wide range of materials, including glass ceramics, lithium disilicate, and translucent zirconium oxide. It features dry milling capabilities, enabling same-day solid zirconia restorations. The machine is equipped with two motors for robust performance and has a user-friendly interface. It supports block sizes up to 55 mm and is

compatible with around 50 different materials from validated partners.

Pros:
– Highly precise milling and grinding capabilities with accuracy of ± 25 µm
– Efficient production, with the ability to produce a dental crown in roughly 11 m…
– Versatile applications, including single-tooth restorations, bridges, and implan…
– Dry milling capability for same-day solid zirconia restorations
– User-friendly interface with intuitive touch screen controls
– Compatible with a wide range of materials and validated partners

Cons:
– Requires regular maintenance, including cleaning of cooling water nozzles and re…
– Installation must be in a location with adequate heat exchange and away from hig…
– May require additional costs for optional software and accessories, such as the…

Dentsply Sirona CEREC Primemill Milling Unit

Product Details: The CEREC Primemill is a wet/dry grinding and milling unit designed for chairside production. It features a 7-inch touch interface, an integrated camera for scanning material blocks with compatible data matrix codes, and an RFID scanner for reading tool information. The unit is powered by two spindles and four motors, allowing for precise and fast milling, including the ability to mill a full-contour zirconia crown in under five minutes. It supports a wide range of materials and indications up to a block size of 70 mm. The unit operates within a temperature range of 5°C to 40°C and humidity range

of 80% rel. up to 31°C decreasing to 50% rel. up to 40°C. It is designed for continuous operation and integrates seamlessly with other CEREC devices and the CEREC Software 5.

Pros:
– User-friendly design with a large 7-inch touch interface that guides the user st…
– Super Fast mode for zirconia crowns, allowing for milling in under five minutes.
– Integrated block scanner and RFID tool reader for easier and faster workflow.
– Produces restorations with clear margins and very smooth surfaces due to high-sp…
– Versatile, supporting both wet and dry milling and wet grinding of various mater…
– Highly accurate 0.5 mm milling tool for detailed results, especially in occlusal…
– Seamless integration with CEREC Primescan and CEREC Software 5 for efficient dig…

Cons:
– No protection against ingress of water, requiring indoor use only.
– Specific environmental conditions required for operation, such as temperature an…
– Dependence on compatible data matrix codes for block scanning and RFID chips for…

Dentsply Sirona CEREC® MC X Dental Milling Machine

Product Details: The Dentsply Sirona CEREC MC X dental milling machine is designed for precise milling and grinding of various chairside dental restorations. It integrates seamlessly with CEREC software to produce accurate surfaces, edges, and fissures. The machine can handle a range of materials including glass ceramics, lithium disilicate, and translucent zirconium oxide. It is capable of milling inlays, onlays, crowns, veneers, bridges, abutments, and surgical guides. The machine features dry milling capabilities, allowing for same-day solid zirconia restorations. It has two motors for robust performance and can produce a dental crown in approximately 11 minutes. The dimensions are 27.6 x 16.7

x 16.5 inches (70.1 x 42.41 x 41.91 cm) and it weighs 95 lbs (43.09 kg). The milling accuracy is ± 25 µm, and it can handle block sizes up to 15.5 mm x 19 mm x 40 mm.

Pros:
– High-speed milling: Produces crowns, inlays, onlays, and veneers in minutes.
– Precise milling and grinding capabilities with accuracy of ± 25 µm.
– Versatile applications: Suitable for single-tooth restorations, bridges, and imp…
– Dry milling capability: Enables same-day solid zirconia dental restorations.
– User-friendly interface: Intuitive controls for ease of use.
– Flexible: Handles practice laboratory indications at any time.

Cons:
– Requires specific installation conditions: Must be installed in a location with…
– Maintenance requirements: Regular replacement of instruments and cleaning of coo…
– Limited to certain materials and software versions: Some features and materials…

CEREC MC XL milling units and burs | Dental CAD CAM …

Product Details: The Dentsply Sirona CEREC MC X and MC XL milling machines are designed for precise and efficient chairside dental restorations. The CEREC MC X can mill and grind various dental restorations such as inlays, onlays, crowns, bridges, and abutments with high accuracy (± 25 µm) and speed, producing a dental crown in approximately 11 minutes. The MC XL offers extended capabilities, including the ability to create fully anatomical single tooth restorations up to a block size of 85mm. Both machines support wet and dry milling, enabling same-day solid zirconia restorations without compromising quality. They integrate seamlessly with CEREC software and

are equipped with multiple motors for robust performance[1][2][4].

Pros:
– High precision and accuracy in milling and grinding
– Efficient production time, with a crown produced in approximately 11 minutes
– Supports both wet and dry milling processes
– Capable of handling a wide range of materials including glass ceramics, lithium…
– Seamless integration with CEREC software for smooth surfaces and precise edges
– Versatile in producing various dental restorations and surgical guides

Cons:
– Requires regular maintenance and annual servicing by trained technical personnel
– Must be installed in a location with adequate ventilation and heat exchange, avo…
– Needs to comply with country-specific regulations and safety inspections

Dentsply Sirona CEREC MC X Milling Machine

Product Details: The Dentsply Sirona CEREC MC X is a dental milling machine designed for various chairside indications. It can produce single-unit restorations such as crowns, inlays, onlays, and veneers, as well as multiple-unit restorations like bridges, abutments, and surgical guides. The machine supports a wide range of materials including glass ceramics, lithium disilicate, and translucent zirconium oxide. Key features include advanced imaging technology, high-speed milling, and a user-friendly interface. The machine has a milling precision of ± 25 µm and can handle block sizes up to 15.5 mm x 19 mm x 40 mm. It is compatible with various scanners and

does not require compressed air, instead using an integrated water tank.

Pros:
– High-speed milling allows for quick production of restorations in minutes.
– User-friendly interface with intuitive controls.
– Versatile applications including single-tooth restorations, bridges, and implant…
– Durable design with minimal maintenance requirements.
– Capable of dry milling, enabling solid zirconia restorations in a single visit.
– Compatible with a wide range of materials and scanners.

Cons:
– No touch display available.
– Requires regular maintenance and instrument replacements.
– Limited to block sizes up to 15.5 mm x 19 mm x 40 mm for standard configurations…

China Customized Dental Milling Machine Suppliers and …

Cerec

Sirona(Cerec)——Milling burs

CEREC Primemill Milling Machine – CAD/CAM

Comparison Table

Frequently Asked Questions (FAQs)

Frequently Asked Questions About Cerec Milling Unit Factories in China

What types of products do Cerec milling unit factories in China typically manufacture?

Cerec milling unit factories in China produce a wide range of dental products, including zirconia blocks, milling burs, and various CAD/CAM dental milling units. These products are designed for creating crowns, bridges, inlays, veneers, and other dental restorations using advanced CAD/CAM technology. The factories also offer customized zirconia blocks and milling tools compatible with different CAD/CAM systems like Sirona Cerec, Zirkon Zahn, and Amann Girrbach.

What is the quality and durability of the zirconia blocks produced by these factories?

The zirconia blocks produced by these factories are made from high-quality nanometer medical-grade zirconia powder. They are compacted using cold isotactic pressing and pre-sintered to ensure good machinability. These blocks have high strength, excellent wear resistance, and good transparency, making them ideal for creating natural-looking dental restorations. The bending strength of these blocks can range from 900 to 1350 MPa, depending on the type.

How do these factories ensure the precision and accuracy of their products?

To ensure precision and accuracy, these factories use advanced CAD/CAM technology and high-quality production equipment. The zirconia blocks are designed with edge grooves required for milling machines, and each disc has a barcode and scaling factor printed on it for consistent scaling. The factories also employ experienced professional teams and rigorous quality control measures to maintain consistent product quality.

What kind of support and services do these factories offer to their customers?

These factories provide comprehensive support and services to their customers. They have professional sales and after-sales service teams that offer consultations and support. The factories also participate in industry exhibitions and continuously improve their products based on customer feedback. Additionally, they ensure environmental protection and adhere to relevant regulations and standards, providing reliable and durable products.

How can I purchase or inquire about products from these factories?

You can purchase or inquire about products from these factories through various channels. Many of these factories have online platforms where you can send inquiries or request free samples. They also offer multiple payment options, such as L/C, T/T, D/P, Western Union, and Paypal. For specific details, you can contact their sales team directly, and they will provide you with a detailed budget and any other information you need.