Are you looking for the best vacuum forming machine manufacturers in China? If so, you’re in the right place. In this article, we’ll compare some of the top factories, including ZHANSHI Machinery, DitaiPlastic, and WeProFab, to help you make an informed decision for your needs. Let’s dive in

Erkoform-3d+

Product Details: The Erkoform-3d+ is a thermoforming unit with the following specifications: Height 31.5 cm, Width 35 cm, Depth 37 cm, weight 11.9 kg, foil diameter 120 mm, and foil thickness 0 – 5.5 mm. It operates on ~220 – 240 (110 – 120) (100) volts, 50 – 60 hertz, with a power consumption of 340 watts and a maximum vacuum of 0.8 bar. The noise level is less than 60 dB(A). The unit features medium-wave infrared heating, which does not require preheating time and ensures the material heats up evenly in-depth. It also includes a touchless temperature sensor, vertical pre-stretching for

even foil thicknesses, and acoustic and visual signals for operation status and remaining time.

Pros:
– No compressed air supply required, plug and play.
– No preheating time needed due to medium-wave infrared heating.
– Touchless temperature sensor for accurate temperature measurement.
– Vertical pre-stretching and fitting for even foil thicknesses.
– Easily accessible model during the heating period.
– Acoustic and visual signals suitable for people with impaired hearing.
– Large volume reserve vacuum for sudden forming.
– Compatible with Occluform-3 as an accessory.

Cons:
– Does not have an automated thermoforming process like the Erkoform-3dmotion mode…
– Requires manual operation for the thermoforming process.

Erkoform-3dmotion – Thermoforming Units

Product Details: The Erkoform 3D Motion is a thermoforming unit designed for fabricating various dental appliances such as bite splints, nightguards, retainers, fluoride and bleaching trays, sports mouthguards, and orthodontic appliances. It features an automated thermoforming process using a vacuum technique and medium-wave infrared heating, which does not require preheating time. The unit includes a touchless temperature control, reserve vacuum, preprogrammed settings, and a touchpanel screen for simple operation. It does not require an external compressed air supply and is equipped with features like sudden vacuum, perpendicular pre-stretching, and one-hand foil fixation for foil thicknesses of 0 to 5.5 mm. The unit

measures 31.5 cm x 35 cm x 37 cm, weighs 13.9 kg, and operates at 340 watts with a maximum vacuum of 0.8 bar and a noise level of <60 dB(A)[2][3][4].

Pros:
– Automated thermoforming process increases productivity and reduces costs
– No preheating time needed due to medium-wave infrared heating
– Touchless temperature sensor for accurate temperature determination
– Sudden vacuum built up before thermoforming process for optimal results
– Perpendicular pre-stretching and fitting for even foil thicknesses
– Completely accessible model during the heating process
– Practical one-hand foil fixation for foil thicknesses of 0 to 5.5 mm
– No external compressed air supply required, plug and play
– Acoustic and visual signals suitable for people with impaired hearing

Cons:
– Higher cost compared to manual thermoforming units
– Limited availability and varying prices across different regions
– Requires proper training to fully utilize the automated features
– Dependence on electrical power and specific voltage requirements

ERKODENT – ERKOFORM 3D Motion Vacuum forming unit

Product Details: The Erkoform-3d motion is a vacuum forming unit with an automated thermoforming process. It is designed for fabricating various dental appliances such as bite splints, nightguards, retainers, and orthodontic appliances. The unit features medium-wave infrared heating that does not require preheating time, allowing materials to heat up evenly in-depth. It includes a touchless temperature sensor for accurate temperature measurement, a large volume reserve vacuum for sudden forming, and vertical pre-stretching for even foil thicknesses. The unit operates without a compressed air supply, is plug-and-play, and has acoustic and visual signals. It comes with a thermoforming starter kit including application brochures,

material samples, and auxiliaries. Technical specifications include dimensions of H 31.5 cm / W 35 cm / D 37 cm, weight of 13.9 kg, operating voltage of ~220-240 volts, and a power consumption of 360 watts.

Pros:
– Automated thermoforming process increases productivity and reduces costs
– No preheating time required due to medium-wave infrared heating
– Touchless temperature sensor ensures accurate temperature measurement
– No compressed air supply needed, plug-and-play operation
– Sudden vacuum forming for precise results
– Vertical pre-stretching for even foil thicknesses
– Easily accessible model during the heating process
– Practical one-hand foil fixation for foil thicknesses of 0 to 5.5 mm
– Acoustic and visual signals suitable for people with impaired hearing

Cons:
– Higher cost compared to manual thermoforming units
– Requires specific technical knowledge for optimal use
– Dependent on electricity supply, may not be suitable for areas with frequent pow…

Erkoform-3d+: Vacuum Thermoforming Machine

Product Details: The Erkoform-3D and Erkoform-3D Motion are vacuum thermoforming units designed for dental laboratories. The Erkoform-3D+ lacks automated thermoforming, while the Erkoform-3D Motion features an automated process. Key specifications include dimensions of H 31.5 / W 35 / D 37 cm, weight of 11.9 kg (Erkoform-3D+) or 13.9 kg (Erkoform-3D Motion), and power consumption of 340 watts. They operate on 220-240 volts, 50-60 hertz, with a maximum vacuum of 0.8 bar and a noise level below 60 dB(A). The units use medium-wave infrared heating without preheating time and include touchless temperature sensors for accurate temperature measurement.

Pros:
– Automated thermoforming process in the Erkoform-3D Motion, increasing productivi…
– No compressed air supply required, plug and play operation
– No preheating time needed due to medium-wave infrared heating
– Touchless temperature sensor for accurate temperature measurement
– Sudden vacuum built up before thermoforming process for even foil thicknesses
– Vertical pre-stretching and fitting for consistent results
– Easily accessible model during the heating process
– Acoustic and visual signals suitable for people with impaired hearing
– Occluform-3 attachment available for imprinting the opposing bite

Cons:
– Higher cost for the automated Erkoform-3D Motion compared to the manual Erkoform…
– Limited to specific foil thicknesses (0-5.5 mm)
– Requires proper training to utilize the automated features effectively
– Dependent on electrical power supply, which could be a limitation in certain env…

Erkoform-3D motion – Erkodent Thermoforming Products

Erkoform-3d motion | Erkodent Thermoforming Machine

Product Details: The Erkoform-3D Motion is a thermoforming unit with an automated thermoforming process. It is designed for fabricating various dental appliances such as bite splints, nightguards, retainers, and orthodontic appliances. Key features include a medium-wave infrared heating system that does not require preheating time, a touchless temperature sensor for accurate temperature measurement, and a reserve vacuum for sudden forming. The unit operates without a compressed air supply, has vertical pre-stretching and fitting for even foil thicknesses, and is equipped with a 3.2 inch color TFT display. It supports foil thicknesses of 0 to 5.5 mm and has a noise level of

less than 60 dB(A). The dimensions are 31.5 cm x 35 cm x 37 cm, and it weighs 13.9 kg. The power consumption is 340 watts, and it operates on 220-240 volts, 50-60 hertz[5].

Pros:
– Automated thermoforming process increases productivity and reduces manual labor
– No compressed air supply required, making it a plug-and-play device
– No preheating time needed due to medium-wave infrared heating
– Touchless temperature sensor ensures accurate temperature measurement
– Reserve vacuum allows for sudden forming, enhancing the thermoforming process
– Vertical pre-stretching and fitting ensure even foil thicknesses
– Easy operation via a high-resolution 3.2 inch color TFT display
– Acoustic and visual signals make it suitable for people with impaired hearing
– Includes a starter kit with thermoforming materials, filling granules, and auxil…

Cons:
– Higher cost compared to manual thermoforming units
– Limited to specific types of dental appliances
– Requires proper maintenance to ensure the longevity of the device
– May have a learning curve for new users due to the automated process

Erkoform 3D Motion

Product Details: The Erkoform 3D™ Motion is a thermoforming unit designed for fabricating various dental appliances such as bite splints, nightguards, retainers, fluoride and bleaching trays, sports mouthguards, and orthodontic appliances. It features an automated thermoforming process using a vacuum technique to thermoform and imprint the opposing bite for optimum fit. The unit includes a touchless temperature sensor, reserve vacuum, and a touchpanel screen for simple program operation. No external compressed air supply is required. The machine operates with preprogrammed settings for Erkodent foil heating temperatures and cooling times, and custom programs can be easily added. It also includes a material samples

kit, step-by-step technique manual, and an easy-to-follow technique DVD.

Pros:
– Automated thermoforming process increases productivity and reduces costs
– No external compressed air supply required
– Easy operation with preprogrammed settings and custom program options
– Touchless temperature sensor for accurate temperature determination
– No preheating time needed
– Sudden vacuum built up before the thermoforming process
– Vertical pre-stretching and forming ensures even foil thicknesses
– Completely accessible model during the heating process
– Practical one-hand foil fixation for foil thicknesses ranging from 0 to 5 mm

Cons:
– No significant cons mentioned in the product description
– Additional costs for accessories like the Occluform-3 attachment

Automated thermoforming machine – Erkoform-3d motion …

Product Details: The Erkoform-3d motion is a thermoforming unit by Erkodent Erich Kopp, featuring an automated thermoforming process. It is designed to streamline the thermoforming step, eliminating the need to manually move the hot foil from the heating element to the model. The unit includes a touchpanel with animations guiding the work sequence and indicates the required working steps. It also provides acoustic and optic signals, making it suitable for deaf persons. Users can select the type and thickness of the foil and adjust the thermoforming temperature and cooling time as needed. The display shows the operating status and remaining time[1].

Pros:
– Automated thermoforming process saves time and effort
– User-friendly touchpanel with animations and step-by-step guidance
– Acoustic and optic signals for accessibility
– Customizable thermoforming temperature and cooling time
– Display shows operating status and remaining time

Cons:
– Limited automation to the thermoforming step only
– Requires connection to existing compressed air system for some models (e.g., Erk…

Erkoform-3dmotion Instructions

Product Details: The Erkoform 3D Motion is a thermoforming unit designed for dental laboratories. It features an automated thermoforming process, eliminating the need to manually move the hot foil from the heating unit to the model. The unit includes a touchless temperature sensor, reserve vacuum, preprogrammed settings, and a touchpanel screen for simple operation. It does not require an external compressed air supply and is equipped with medium-wave infrared heating, which heats the material evenly without preheating time. The unit supports foil thicknesses of 0 to 5.5 mm and has a sudden vacuum build-up before the thermoforming process. It also includes an

Occluform-3 attachment option for imprinting the opposing bite.

Pros:
– Automated thermoforming process increases productivity and reduces costs
– No external compressed air supply required, plug and play
– Touchless temperature sensor for accurate temperature determination
– No preheating time needed
– Sudden vacuum build-up before thermoforming process
– Vertical pre-stretching and fitting for even foil thicknesses
– Easily accessible model during heating period
– Acoustic and visual signals suitable for people with impaired hearing
– Includes material samples kit, technique manual, and DVD

Cons:
– Higher cost compared to manual thermoforming units
– Dependence on electrical power for operation
– Limited to specific foil thicknesses (0 to 5.5 mm)
– Requires proper maintenance to ensure optimal performance

Erkodent Erkoform 3D Motion Dental Vacuum Forming …

Comparison Table

Frequently Asked Questions (FAQs)

Frequently Asked Questions About Erkodent Vacuum Formers and Similar Facilities in China

Are Erkodent vacuum formers manufactured in China?

No, Erkodent vacuum formers are not manufactured in China. These units are made in Germany, known for their high-quality engineering and precision.

What types of companies in China specialize in vacuum forming?

Companies like Dongguan Ditai Plastic Products Co., Ltd. specialize in vacuum forming in China. They are involved in the research, development, design, manufacture, and technical services of large plastic products, including vacuum forming processes.

What kind of equipment do Chinese vacuum forming facilities typically use?

Chinese vacuum forming facilities, such as DitaiPlastic, use a wide range of advanced equipment including multiple vacuum forming machines, CNC cutting machines, 5-axis CNC machines, CNC molding machines, and extrusion plastic sheet lines. They also employ specialized tools like mold temperature guns and bulge technology.

Do Chinese vacuum forming companies have international certifications?

Yes, many Chinese vacuum forming companies, like DitaiPlastic, hold international certifications such as ISO 9001, ISO 45001, ISO 14001, and IATF 16949. These certifications ensure that the products meet high standards of quality, safety, and environmental responsibility.

Can Chinese vacuum forming companies handle complex and custom projects?

Yes, companies like DitaiPlastic are capable of handling complex and custom projects. They have experienced engineers who can design, develop, and produce all elements in-house, from design and tooling to forming and CNC cutting, and even complex assembly of the final product.